Previous Article

How to Install Stamped Concrete

Next Article

How to Lay Stamped Concrete for a Driveway

How to Lay Stamped Concrete

Stamped concrete is becoming increasingly popular due to its ability to withstand constant abuse. The look and feel of stamped concrete can resemble expensive tiling however; it will last longer for patios and driveways. Laying stamped concrete is a quick and easy process and only requires a bit of creatively.

Things You’ll Need:



  • Prepared concrete

  • Concrete stamps

  • Paper & pencil

  • Trowel


 



  1. Pour the concrete over the surface of the area you wish to design. Allow the concrete to finish setting for about two to three hours. After the time allotted, stick your finger in the concrete and see if you notice an indentation. Once this happens, the concrete is ready. Smooth the finished concrete with a trowel and small amount of water to cover the finger mark.

  2. Sketch out a design on a piece of paper before stamping the concrete. This allows for mistakes and paper is an easier way to erase mistakes than concrete.

  3. Hold each stamp above the concrete once the design is finished. This will require steady hands as each stamp needs to be placed correctly and carefully onto the concrete. Once the position of the stamp is established, press it into the surface of the concrete.

  4. Raise the stamp and examine the imprint. If the imprint looks fine, continue stamping the entire concrete surface according to your design. If the imprint is not what you were expecting, simply apply water to the area. Since the concrete is still damp, run a trowel over the area to smooth it out.