How to Install a Spoiler on a Pickup Truck
Until recently, aftermarket custom parts were not available for pickup trucks; however, today there are lots of options to choose from, including spoilers. A spoiler can be installed on your pickup truck in a matter of a few short minutes. Installing a spoiler is a very simple process.
Installing a Spoiler on a Pickup Truck
1. Purchase a spoiler kit that is specifically designed for your pickup truck.
2. If you spoiler needs to be painted, it is much easier to paint your spoiler before installation.
3. Place the spoiler in the intended location for mounting. Be sure the spoiler installation will not interfere with any tailgate function. Make sure the spoiler is lined up correctly.
4. Using a dry erase marker, trace around the entire base of the spoiler.
5. Cover the location of the truck where drilling is to occur with three layers of masking tape. The tape will protect your truck's paint from chips and damage.
6. Mark the area of that is to be drilled on the masking tape.
7. Drill the holes slowly, making sure your drill bit does not move from the drill mark. Remove the masking tape once the holes have been drilled.
8. Place the spoiler back on the truck. Insert a bolt with a washer through the truck into the spoiler. Thread the bolt correctly and tighten.