Previous Article

How To Sand Auto Paint

Next Article

How to Sand Hardwood Floors

How to Sand Concrete Counters

Concrete countertops have become increasingly popular with homeowners wishing to update their counters. They can create different looks with a variety of colors without having to tear up the entire area. Concrete countertops are durable and will last a long time. The only downfall to them is that they will scratch or chip, which can be easily repaired.

How to Sand Concrete Counters


Materials Needed



  • Soap

  • Water

  • Sponge

  • Mask

  • Safety goggles

  • 100 grit sanding disks

  • Orbital sander



  1. Fill a sink with soap and water. Use a sponge to clean the countertops. Rinse the counters to remove all traces of the soap. Allow the area to thoroughly dry for approximately two hours. You should always start with a clean surface when sanding.

  2. Wear a mask and safety goggles to protect your eyes, nose and mouth from the flying particles when you are sanding.

  3. Place a 100 grit sanding disk on an orbital sander. Turn on the sander and go over the countertops. The first place you should start sanding is the edges of the counter.

  4. Turn off the sander and rub your hands over the edges to make sure they are smooth with no jagged edges. Repeat the sanding process on those areas if you feel edges that are not smooth.

  5. Turn on the sander and sand the countertop. The best place to start sanding the top of the counters is at one end and move in a vertical or horizontal direction until the surface is completely sanded.

  6. Keep the sanding lines straight and even. Turn off the sander once the surface is complete. Inspect the surface for uneven spots and sand those areas again if necessary. You should also change the sanding disk as often as you need to.