How to Trim Car Mats
Trimming down car mats to make them fit in your car can sometimes be difficult due to the thickness of the mat. Most car mats consists of a thick piece of cardboard that is lined with a rubber backing. For this reason, you will need to be careful when trimming down car mats to ensure a straight and even cut.
Supply List
- Large block of wood
- Utility knife
- Chalk line
- Scissors
- Remove the car mats from the car.
- Vacuum the mats to remove all dirt and debris using a handheld vacuum attachment.
- Replace the car mats back into the car where they belong.
- Use a chalk line to carefully mark the area of the mats where they need to be trimmed. Chalk out all four sides using the chalk line to ensure a straight line.
- Place the car mat onto a large block of wood.
- Use a utility knife to cut one side of the car mat at a time following the markings of the chalk line that have been made. Press firmly and quickly to achieve an even and straight line.
- Repeat this process on all 4 sides of the car mat until it has been trimmed down to the appropriate size for the car.
- Replace the mat into the car and see if it fits correctly. If there are any further cuts that need to be made, outline the cuts with a chalk line.
- Make any additional cuts that may be needed.
- Use a pair of scissors to cut off any loose or frayed ends on the edges of the car mat.
- Repeat steps 4-10 for each additional car mats that needs to be trimmed. Be sure to take your time and cut slowly for accuracy when trimming car mats.
- Replace all of the car mats into the car when you are finished with the trimming process.