Previous Article

How to Troubleshoot a Propane Fireplace

Next Article

How to Install Installation a Wood Stove Metal Chimney

How to Turn on your Gas Fireplace

In order to enjoy the beauty and convenience of your gas fireplace, you first need to turn it on. One of the luxuries of gas fireplaces is how easy they are to turn on and operate.  By following a few short simple steps, your gas fireplace is on and operating in little time.

What You'll Need:



  • Gas Fireplace

  • Flue

  • Pilot light

  • Matches (optional)


 





  1. Before you begin you'll need to open the flue. The flue is the component that allows the heat to escape through the chimney. If you don't complete this step first, the room will fill with carbon dioxide, which can be deadly.

  2. In order to open the flue, locate the knob or lever that controls it and turn or move the device until you cannot open it anymore. You can use a mirror to check and see if you have opened it correctly, if you are able to see up the chimney.

  3. Ensure that the pilot light inside the fireplace is on. This is typically located on the bottom edge of the fireplace. Look for a small blue flame, usually on the same side as the knob you'll use to turn the fireplace on.

  4. Locate the black knob that should be labeled "On" and"Off". Turn the knob all the way to the right until the flames are as strong and high as possible. If you want to reduce the amount of flames, turn the knob to the left.

  5. Once you are finished enjoying your gas fireplace, ensure that the gas knob is in the "Off" position and close the flue.