How to Remove Rear Speakers From a 350Z
Every model of the Nissan 350Z comes equipped with built-in speakers as part of the factory installed sound system. After a while you may want to remove and replace the rear speakers in the vehicle due to damage or the desire to upgrade your sound system.
What You'll Need:
- Panel tool
- Phillips screwdriver
- Insert the panel tool just under the rear edge of the scuff plate on the driver's side door of the vehicle. Gently pry it upwards in order to release the clips from the rear portion. Repeat this process for the passenger side of the vehicle as well.
- Locate the door gasket and pull it away from the rear side panel on both doors. You'll need to use enough force to easily remove it, however, you don't want to use so much force that you cause unnecessary damage to the vehicle.
- Gently pry away the edges of the rear side panel on both sides of the vehicle. Starting at the bottom edge and continue upward to completely remove both panels when the panels feel as though they are loose enough.
- Open both of the rear doors on the vehicle and find the pockets located on the back wall. Begin prying away the edges of these pockets and remove them away from the panel.
- Starting at the bottom gently pry upward on the rear panel. Once the top of the panel is loose at the top slide it backwards to gain access to the speakers.
- Using a Phillips screwdriver, unscrew the four screws that secure each speaker in place. Pull out the speakers from their openings and unplug each of the connectors located on the rear side of the speakers.