How to Remove a 350Z Kickplate
The Nissan 350Z is a sporty car that was produced for almost 10 years. Introduced in 2002, the 350Z quickly caught on with auto enthusiasts. The reason for their affection is the ease with which modifications can be made to the vehicle. In particular, the kickplate is designed to be easily accessible and easy to remove.
- Obtain the tools needed to remove the kickplate. Nissan designed the 350Z with an easy to remove kickplate. All that is needed to remove it is a screwdriver and something to cover the tip of the screwdriver. The easiest and most dependable solution for this is electrical or duct tape. However, electrical tape is slightly easier to use due to its smaller width.
- In order to protect the kickplate, the tip of the screwdriver should be covered. The easiest way to accomplish this is to cover the tip in electrical tape. This will prevent the sharp edge of the screwdriver from scratching or damaging the kickplate. Duct tape can be used if electrical tape is not available. However, it will need to be trimmed so that the screwdriver will still be able to fit under the kickplate.
- Gently slide the screwdriver under the kickplate. There are four snaps located in the corners of the kickplate. Ease the screwdriver under the kickplate close to these snaps. This will allow the snaps to come loose without scratching or warping the kickplate. Once the snaps have been removed, ease the screwdriver under the kickplate and gently pry the plate loose. Without the snaps, the kickplate should be relatively easy to remove. However, if it is difficult to remove ensure that all snaps have been removed.