Previous Article

How to Program a Nissan Murano Key Fob

Next Article

How to Start a Nissan Murano

How to Replace Nissan Murano Brake Pads

Replacing brake pads on a Nissan Murano shouldn’t be that difficult. You need to make sure the brake pads are changed on a regular basis, as the Murano is a heavy crossover vehicle. You should have no problem finding replacement brake pads at auto care stores.

Things You'll Need:



  • Tarp or Mat

  • Wheel Wrench

  • Jack

  • Jack Stands

  • Socket

  • Ratchet

  • Screwdriver

  • Gloves

  • Brake Pads



  1. Park your Nissan on level paved ground in an area that's well lit. Having enough space to work on your Murano will be crucial.

  2. Place a tarp or mat around the area you're going to be kneeling or sitting. This will help you keep clean and also help prevent you from loosing parts and tools. 

  3. Loosen the lug nuts on all four wheels.

  4. Jack the vehicle up and place jack stands under each corner on part of the frame.

  5. Remove the lug nuts from the wheel studs.

  6. Slide each wheel off the hub. This might also be a good time to screw the lug nuts back on the studs so you don't lose them. 

  7. Remove the brake calipers by removing the caliper bolts with a socket and ratchet.

  8. Remove the brake pads from the caliper by hand. It would be a good idea to use gloves because the pads will be really dirty and could be hot. Use a screwdriver to pry them loose if they are stuck.

  9. Install new pads. Make sure you buy the right kind of brake pads for a Nissan Murano. Talk with a local expert about choosing the right brand.

  10. Install the calipers using the same socket and ratchet.

  11. Place the wheel back on the hub and tighten the lug nuts.

  12. Remove the jack stands and release the jack pressure to lower your Nissan.