Previous Article

How to Replace a Nissan Xterra Knock Sensor

Next Article

How to Replace a Nissan Xterra Tail Light

How to Replace a Nissan Xterra Radiator

The current model of the Nissan Xterra has been in production since the 2005 model year. The radiator contains coolant which circulates through the engine to prevent overheating. The procedure for replacing the radiator in a Nissan Xterra is generally the same for all current models as of 2011.



  • Socket wrench

  • Siphon hose

  • Coolant container

  • Mechanics wire



  1. Wait for the engine to cool down completely. Remove the cable from the negative battery terminal with a socket wrench. Drain the coolant from the radiator with a siphon hose and dispose of it properly.

  2. Disconnect the air duct brackets, air duct and air cleaner case from the engine with a socket wrench. Detach the hose from the reservoir tank. Disconnect the hoses from the radiator.

  3. Remove the cooling fan from the radiator with a socket wrench. Detach the transmission fluid hoses from the radiator if your vehicle is equipped with automatic transmission. Plug the open ends of the hoses with clean cloth to prevent the leakage of transmission fluid.

  4. Disconnect the mounting bolts from the upper radiator bracket with a socket wrench. Remove the mounting bolts for the air conditioner condenser if your vehicle is so equipped.

  5. Remove the lower mount for the radiator from the support center with a socket wrench. This will require you to lift the radiator off the support center and pull it slightly to the rear of the vehicle.

  6. pulled the condenser for the air conditioner and disconnect the fitting on the bottom of the radiator. Remove the radiator from the vehicle.

  7. Place the condenser for the air conditioner on top of the support center for the radiator so that you don't place tension on the air conditioning hoses. Hold the condenser in place with mechanics wire.

  8. Install the new radiator by reversing the removal procedure. Fill the radiator with the proper coolant and start the engine. Correct any leaks in the coolant system.