Previous Article

How to Replace a Nissan Xterra Radiator

Next Article

How to Replace Nissan Xterra Front Brake Pads

How to Replace a Nissan Xterra Tail Light

Proper working car tail lights are imperative in order to drive safely and legally. If the tail lights go out there is no way for the trailing cars to know if you are slowing down, which will increase the chance of an accident. Working tail lights are also needed for a car to pass inspection. The tail lights can easily be changed in a few steps.


  1. Locate the bolts that hold the tail light feature onto the vehicle itself. On the Nissan Xterra, open the rear hatch and on each side there will be two bolts in the inner edge of the assembly; these are the bolts that hold the tail lights to the exterior of the car.

  2. Remove the two bolts. Use a ratchet and socket and rotate the bolts counter clockwise to loosen and remove the bolts. Set the bolts aside so that they are not lost. Remove the assembly by pulling it straight out. Once the assembly is pulled out the bulb sockets will be exposed in the rear of the housing.

  3. Remove the bulb socket. Firmly grasp the bulb socket and turn it counter-clockwise to loosen the assembly before attempting to pull it straight out. 

  4. Displace the bulb from the socket and replace it with a new fully functional bulb that works. 

  5. Replace the socket into its correct place within the housing and tighten the fixture by turning it clockwise. Place the whole tail light assembly back into the correct place in accordance to the position on the body.

  6. Align the holes that the bolts in step one came out of with the holes on the body.  Insert and tighten the mounting bolts by rotating the bolts clockwise with a socket and ratchet. Close the rear hatch, turn the car on, and test the tail lights to ensure that they are fully functional.